See the flood and hazard flags on a NSW address.
Put the address in and read the state flood planning map, bushfire-prone land and acid sulfate soils for that property. Free, with no account.
Each flag names the controls to ask about before you buy, design or lodge.
Free site check
Type an address to read its zone, overlays and likely pathway from public planning data. No account needed.
Three hazard maps, read for your address
Put a New South Wales address in and the read looks the site up on the state planning maps for flood planning areas, bushfire-prone land and acid sulfate soils. Each one comes back as flagged, none flagged or Not checked.
An overlay is an extra control that a council or the state puts on top of the zone. These three are the hazard overlays.
What each flag means
Flood planning area
The address sits inside a flood planning area on the state map. A flood risk assessment may be needed, minimum floor levels may apply and the council's flood controls apply to the development.
Bushfire-prone land
The land is mapped as bushfire-prone, with its vegetation category where the map gives one. A bushfire attack level comes from a site assessment by a qualified person, so the flag is your prompt to book one.
Acid sulfate soils
The land is mapped over acid sulfate soils. Excavation or dewatering can need a management plan, and soil testing can be needed below a trigger depth.
Not checked is a gap, not a clearance
The flood result comes from the state flood planning map, which holds flood mapping for some councils only. An address with no flood flag can still be flood-affected in the council's own studies, so ask the council for its flood information and flood planning controls before you rely on it. A flood flag stands wherever it appears.
Bushfire-prone land, flood or any other layer that was not read for the address shows as Not checked, with the map to look at yourself. Treat it as a gap to close.
Run it before you commit
Type the address
Pick it from the list so the read starts from the right property.
Read the three flags
Flood planning, bushfire-prone land and acid sulfate soils each show flagged, none flagged or Not checked.
Ask the council
Take any flag, and any Not checked row, to the council or to your planner or engineer.
Read the zone and the other overlays too.
The same address gives its zone, what the council allows there and every overlay the read covers.